Filter
Top Products
184 Dell Printer Configuration Web Tool
NOTE: The settings in the Port Settings page will be valid only when the printer
is rebooted. When you change or configure the settings, click the Apply New
Settings button to apply the new settings.
Ethernet
*1
Ethernet
Settings
Auto Detects the Ethernet
transmission rate and the duplex
settings automatically.
10BASE-T Half-
Duplex
Selects 10Base-T Half-Duplex
as the default value.
10BASE-T Full-
Duplex
Selects 10Base-T Full-Duplex
as the default value.
100BASE-TX
Half-Duplex
Selects 100Base-TX Half-
Duplex as the default value.
100BASE-TX
Full-Duplex
Selects 100Base-TX Full-
Duplex as the default value.
1000BASE-T
Full-Duplex
Selects 1000Base-T Full-
Duplex as the default value.
Current Ethernet Settings Displays the current settings of
the Ethernet.
MAC Address Displays the MAC address of
the printer.
Port Status LPD Sets whether to enable LPD.
Port9100 Sets whether to enable Port9100.
IPP Sets whether to enable IPP.
WSD Sets whether to enable WSD.
SMB Sets whether to enable SMB.
Bonjour
(mDNS)
Sets whether to enable Bonjour (mDNS).
E-Mail Alert Sets whether to enable E-Mail Alert.
Telnet Sets whether to enable Telnet.
SNMP Sets whether to enable SNMP.
LLTD Sets whether to enable LLTD.
*1
This item is available only when the printer is connected using LAN cable.