Filter
Top Products
Advanced Troubleshooting 59
No memory
modules are
detected.
• Reinstall all memory modules (see
page 82) and restart the computer.
• To eliminate the possibility of a faulty
memory connector, remove all memory
modules, install one memory module
(see page 82), and then restart the
computer. If the computer starts
normally, move the memory module to
a different connector and restart the
computer. Continue until you have
identified a faulty connector or
reinstalled all modules without error.
• If the problem persists, contact Dell
(see page 95).
A PCI bus failure
has occurred.
1 Determine if a conflict exists by
removing a card and then restarting the
computer.
2 If the problem persists, reinstall the card
that you removed, remove a different
card (see page 80), and then restart the
computer.
3 Repeat this process for each card. If the
computer starts normally, troubleshoot
the last card removed from the
computer for resource conflicts (see
"Resolving Software and Hardware
Incompatibilities" on page 64).
4 If the problem persists, contact Dell
(see page 95).
Other failure has
occurred.
• Ensure that the cables are properly
connected from the hard drive, CD
drive, and DVD drive to the system
board (see page 77).
• If the problem persists, contact Dell
(see page 95).
Diagnostic Code Definition Corrective Action
GYYY
ABCD
YGYY
ABCD
GGGY
ABCD