Filter
Top Products
78 Adding Parts
www.jp.dell.com | support.jp.dell.com
Adding PC Cards (Optional)
You can add PC Cards to computers with integrated PC Card connectors.
PC Card Types
HINT: "Type" of card
refers to its thickness, not
its functionality.
The PC Card slot has two connectors that support four combinations of
cards:
HINT: Your computer is
designed for either 5-V or
3.3-V 16-bit PCMCIA
cards. Some cards are
keyed for 3.3 V only but
will not fit into the PC
slot. Cards are keyed to
prevent incorrect insertion
into the slot. If card
orientation is not clear,
see the documentation
supplied with the card.
• A single Type I or Type II card (using either the upper or lower PC
Card connector)
• One Type I card and one Type II card (using either connector)
• Two Type I cards or two Typ e II cards
• One Type III card (using the lower connector)
Both PC Card connectors support extended PC Cards.
Installing a PC Card
HINT: The length of
some PC Cards may
prevent the front-panel
door from closing.
PC Cards are generally marked with a symbol (such as a triangle or an
arrow) to indicate which end to insert into the slot, and the cards are keyed
to prevent incorrect insertion. If card orientation is not clear, see the
documentation supplied with the card.
1 Hold the card with its orientation symbol pointing into the slot and
the top side of the card facing up.
HINT: A PC Card is not a
bootable device.
2 Insert the card into the slot, and press firmly until the card is
completely seated in the internal PC Card connector.