Filter
Top Products
94 Appendix
www.jp.dell.com | support.jp.dell.com
NOTICE: To avoid damage to the system board while you pry the battery
loose, be sure to insert the plastic screwdriver between the battery and the
socket (not the system board).
6
Insert the new battery into the socket with the side labeled "+" facing
up and snap it into place.
7 Attach the computer stand (see page 19).
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.
8
Connect your computer and devices to electrical outlets, and turn
them on.
9 Access the system setup program (see page 90) and restore the settings
you recorded in step 1.
10 Properly dispose of the old battery (see page 12).
Dell Technical Support Policy
See the Service and Support Guide supplied with your computer.
battery socket
(BATTERY)
battery