Filter
Top Products
198 Configuring System Information
www.dell.com | support.dell.com
Removing SNMP Groups
1
Open the
Access Control Group
page
.
2
Click
Show All
.
The
Access Table
opens.
3
Select a SNMP group.
4
Check the
Remove
checkbox.
5
Click
Apply Changes
.
The SNMP group is deleted, and the device is updated.
Defining SNMP Access Control Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
Access Control Group
page.
The following is an example of the CLI commands:
Table 6-50. SNMP Access Control CLI Commands
CLI Command Description
snmp-server group
groupname
{v1 | v2 |
v3 {noauth | auth |
priv}} [read
readview
] [write
writeview
] [notify
notifyview
]
Configure a new Simple Network Management
Protocol (SNMP) group, or a table that maps
SNMP users to SNMP views.
show snmp groups
[
groupname
]
Displays the configuration of groups
console (config)# snmp-server group user-group v3 priv read user-
view