Filter
Top Products
Configuring System Information 219
Working with the Active Image File Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
Active Images
.
The following is an example of the CLI commands:
Copying Files
Files can be copied and deleted from the
Copy Files
page. To open the
Copy Files
page, click
System
→
File Management
→
Copy Files
in the tree view.
Figure 6-78. Copy Files
The
Copy Files
page contains the following fields:
Copy Configuration
— When selected, copies either the running, startup or backup configuration
file of the Master file to the destination file.
Source
— Indicates the type of file to be copied to the destination file. Select either the
Running Configuration, Startup Configuration or one of the user-defined Backup
Configuration files.
Table 6-57. File Upload CLI Commands
CLI Command Description
boot system
[
unit
|
unit
]
{
image-1
|
image-2
}
Indicates the system image that the device loads at
startup.
show version
[
unit
unit
] Displays version information for the system
Console# boot system image-1