Filter
Top Products
Small Form Factor Computer 215
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product
Information Guide
.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the computer cover.
Removing an Optical Drive
1
Follow the procedures in "Before You Begin" on page 19.
2
Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and
the cable connectors.
3
Pull up on the drive release latch and slide the drive towards the back of the computer. Then lift up to
remove the drive from the computer.
4
Disconnect the power and data cable from the back of the drive.
1 drive release latch 2 optical drive
1
2