Filter
Top Products
126 Microprocessor
www.dell.com | support.dell.com
10 Remove the microprocessor from the socket.
11 Leave the release lever extended so that the socket is ready for the new
microprocessor.
Replacing the Cooling Fan/Heat-Sink
Assembly and Microprocessor
CAUTION: Use a wrist grounding strap as explained in
"Precautionary Measures."
NOTICE: Be careful not to bend any of the pins when you unpack the
microprocessor. Bending the pins can permanently damage the microprocessor.
1
Unpack the new microprocessor.
2 Align pin-1 (the beveled corner) of the microprocessor with the pin-1
corner of the socket.
NOTE: You must identify the pin-1 corner to correctly position the
microprocessor.