Filter
Top Products
The LCD screen displays a series of initialization screens as it turns on. When it is ready, the
Language Setup screen is displayed.
2. Select a language from the options in the dialog box.
The following message is displayed on the enclosure screen: Configure Enclosure?
3. Press the center button to continue to the CMC Network Settings screen.
4. Configure the CMC network settings for your network environment:
• Network speed
• Duplex mode
• Network mode (DHCP or static)
• Static IP address, subnet mask, and gateway values (if static mode was selected)
• DNS settings
5. If required, configure the iDRAC network settings. For more information about iDRAC, see the iDRAC
User’s Guide at support.dell.com/manuals.
NOTE: The configuration wizard automatically configures each blade’s iDRAC internal network
interface if you do not choose to manually configure the iDRAC settings.
NOTE: You cannot set a static IP address for the iDRAC using the LCD configuration wizard. To
set a static IP address, use the CMC web-based interface or Remote Access Controller
Administrator (RACADM).
6. Review the settings on the Network Summary screen:
• If the settings are correct, press the center button to close the configuration wizard and return to
the Main Menu.
• If the settings are not correct, use the left arrow key to return to the screen for that setting and
correct it.
After you complete the configuration wizard, the CMC is available on your network.
13