Filter
Top Products
Indicator Status
Amber blinking
rapidly
Error or fault with port
Fibre channel
port speed
indicator
Indicator Status
Off 2 Gb link established
Green on 4 Gb link established
Amber on 8 Gb link established
Module status
indicator
Indicator Status
Off Module is off or enclosure power is off
Green on All ports are ready for use
Amber on Module is booting, being reset, or ports are offline
Green/amber
blinking
Diagnostic message is in error log, or environmental range is
exceeded
Module power
indicator
Indicator Status
Off Power to the module is off
Green Module has power
Status/
identification
indicator
Indicator Status
Blue on Normal health
Blue off Boot in progress
Blue blinking Identifying module
Amber blinking Fault condition in module
I/O Modules—Pass-Through
Dell 4 Gbps Fibre Channel Pass-Through Module
The 4 Gbps fibre channel pass-through module provides a bypass connection between a fibre channel
mezzanine card in the blade and optical transceivers for direct connection into a fibre channel switch or
a storage array. The 16 pass-through ports on this module can negotiate speeds of 1 Gbps, 2 Gbps, or 4
Gbps. The 4 Gbps fibre channel pass-through module is hot-swappable, and may be installed in Fabric B
or Fabric C.
66