Filter
Top Products
Fabric A Fabric B Mezzanine
Card
Fabric C Mezzanine
Card
I/O Bay A1,
A2
I/O Bay B1,
B2
I/O Bay C1,
C2
through
module
through
module
Standard
Integrated
LOM
Infiniband
mezzanine card
Infiniband
mezzanine card
Ethernet
switch
module or
pass-
through
module
Infiniband
switch
module
Infiniband
switch
module
Standard
Integrated
LOM
Infiniband
mezzanine card
Ethernet mezzanine
card
Ethernet
switch
module or
pass-
through
module
Infiniband
switch
module
Ethernet
switch
module or
pass-through
module
Standard
Integrated
LOM
Fibre channel
mezzanine card
Ethernet mezzanine
card
Ethernet
switch
module or
pass-
through
module
Fibre
channel
switch or
pass-
through
module
Ethernet
switch
module or
pass-through
module
I/O Module Port Mapping—Full-Height Blades
NOTE: The I/O port mappings in the following sections are applicable only to the I/O Pass-Through
Modules.
Standard LOM (Dual-Port) Mapping
Each LOM has two port connections. For a full-height blade in bay n:
• Integrated LOM1, connection 1 connects to I/O module A1, port n.
• Integrated LOM1, connection 2 connects to I/O module A2, port n.
• Integrated LOM2, connection 1 connects to I/O module A1, port n+8.
• Integrated LOM2, connection 2 connects to I/O module A2, port n+8.
For example, in a full-height blade in slot 5:
• Integrated LOM1 connection 1 connects to I/O module A1, port 5.
• Integrated LOM1 connection 2 connects to I/O module A2, port 5.
• Integrated LOM2 connection 1 connects to I/O module A1, port 13.
• Integrated LOM2 connection 2 connects to I/O module A2, port 13.
NOTE: Even though PowerEdge M610x is a full-height blade system, only one network controller
(LOM1) is available.
For PowerEdge M610x blade in bay n, the integrated NIC connects to I/O module A1, port n and I/O
module A2, port n.
41