Filter
Top Products
112 Configuration: Disk Groups and Virtual Disks
5
In
Advanced virtual disk parameters
, you can select:
•
Use recommended settings
.
•
Customize settings
.
6
If you select
Use recommended settings
in
Advanced virtual disk
parameters
, click
Finish
. Otherwise, click
Next
.
7
In the
Customize Advanced Virtual Disk Parameters
window, select the
appropriate Virtual Disk I/O characteristics type. You can select:
•
File system (typical)
•
Database
•
Multimedia
•
Custom
NOTE: If you select Custom, you must select an appropriate segment size.
8
Select the appropriate
Preferred RAID controller module ownership
.
9
Click
Finish
.
The virtual disks are created.
Changing the Virtual Disk Modification Priority
You can specify the modification priority setting for a single virtual disk or
multiple virtual disks on a storage array.
Guidelines to change the modification priority of a virtual disk:
• If more than one virtual disk is selected, the modification priority defaults
to the lowest priority. The current priority is shown only if a single virtual
disk is selected.
• Changing the modification priority by using this option modifies the
priority for the selected virtual disks.
To change the virtual disk modification priority:
1
In the AMW, select the
Logical
tab.
2
Select a virtual disk.
3
In the toolbar, select
Virtual Disk
Change
Modification Priority
.
The
Change Modification Priority
window is displayed.
book.book Page 112 Thursday, December 9, 2010 3:20 PM