Filter
Top Products
Management: Firmware Downloads 201
Downloading Only NVSRAM Firmware
Use the command line interface (CLI) to download and activate NVSRAM to
several storage arrays. For more information, see the PowerVault Modular Disk
Storage Manager online help topics.
To download only NVSRAM firmware:
1
To download the NVSRAM firmware from:
•EMW—Go to step7.
•AMW—Go to step2.
2
Select
Advanced
Maintenance
Download
RAID Controller
Module NVSRAM
or
Select the
Support
tab, and click
Download Firmware
. In
Select download
task
, select
Download RAID controller module NVSRAM
and click
OK
.
An error message appears. Click
OK
to close it, and select a compatible
file.
3
To locate the directory in which the file to download resides, click
Select
File
.
4
Select the file to download in the
File selection
area, and click
OK
.
By default, only downloadable files that are compatible with the current
storage array configuration appear.
When you select a file in the File selection area, applicable attributes (if
any) of the file appear in the NVSRAM File information area. The
attributes indicate the version of the NVSRAM file.
5
Click
Transfer
.
NOTE: If the file selected is not valid or is not compatible with the current
storage array configuration, the File Selection Error dialog appears. Click OK
to close it, and choose a compatible NVSRAM file.
6
Click
Yes
in the
Confirm Download
dialog.
The download starts.
book.book Page 201 Thursday, December 9, 2010 3:20 PM