Filter
Top Products
Management: Installing Array Components 219
Removing a RAID Controller Module
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1
Disconnect the cables connected to the RAID controller module.
2
Push down on the release tab and pull the release lever away from the
chassis. See Figure 16-8.
3
Grasp the release lever and pull the module away from the chassis.
NOTE: To avoid damage to the sensitive EMI contacts on the RAID controller
module, do not stack RAID controller modules.
Figure 16-8. Removing and Installing a RAID Controller Module
1 RAID controller module 2 release tab
3 release lever
2
3
1
book.book Page 219 Thursday, December 9, 2010 3:20 PM