Filter
Top Products
Planning: RAID Controller Modules 33
8 Controller power LED Lights green when controller is turned on.
Off when controller is not turned on.
9 Controller fault LED Lights amber when controller fault detected.
Off when controller operating normally.
10 iSCSI IN port activity
LED
Lights green when there is no activity on connection.
Blinks green when there is activity on connection.
Off when link is down.
11 System identification
LED
Blinks blue when system identification switch push-
button on enclosure front panel is pressed.
12 Cache active or cache
offload LED
Lights green when On-board controller memory
contains data.
If AC power fails, this LED changes to indicate Cache
Offload status. If the password reset function has
successfully changed the password, this LED flashes
on and off briefly.
13 Battery fault Lights amber when battery backup unit or battery has
failed.
Off when battery backup unit is operating normally.
14 Password reset switch Activating this switch deletes the password.
15 MAC address label Provides MAC addresses of iSCSI host ports and the
management port.
16 Management port
speed LED
Lights green when Ethernet connection is operating at
1000 Mbps.
Lights amber when Ethernet connection is operating
at 100 Mbps.
Off when Ethernet connection is operating at 10
Mbps or is not active.
17 Management port
activity LED
Lights green when Ethernet connection is active.
Off when Ethernet connection is not active.
Item Component Function
book.book Page 33 Thursday, December 9, 2010 3:20 PM