Filter
Top Products
Management: Installing Array Components 239
Figure 15-12. Securing the Power Cable
CAUTION: When connecting the power cable, secure the cable with the velcro strap.
NOTE: If the array is powered on, all the power supply LEDs remain off until the AC
power cable is connected to the power supply/cooling fan module and the power
switch is turned on.
4
Turn on the power supply/cooling fan module.
Control Panel
Removing the Control Panel
1
Turn off the array and host server.
2
Disconnect all the power cables connected to the array.
3
Remove the hard drives from:
– slots 0 to 2 in
PowerVault MD3600f
– slots 0 to 5 in
PowerVault MD3620f
See "Removing a Hard Drive" on page 224.
NOTE: Mark each hard drive with it’s slot position as you remove it.
1 velcro strap
1
book.book Page 239 Wednesday, June 8, 2011 5:01 PM