Filter
Top Products
Setting Up 25
• Second battery
• Dell TravelLite™ module
NOTICE: To prevent damage to the docking connector, do not remove or
replace devices while the computer is connected to an advanced port replicator
(APR).
Swapping Devices While the Computer Is Turned Off
1 Save and close any open files, exit any open programs, and shut down
the computer (see page 24).
2 If the computer is connected (docked) to an APR, undock it (see
page 79).
3 Close the display and turn the computer over.
4 Slide and hold the latch release, and pull the device out of the module
bay.
NOTICE: To prevent damage to devices, place them in a travel case when they
are not inserted into the computer. Store devices in a dry, safe place, and avoid
pressing down on them or placing heavy objects on top of them.
NOTICE: Insert devices before you dock and turn on the computer.
5
Insert the new device into the bay, and push it until you hear a click.
6 Turn on the computer.
Swapping Devices While Windows Is Running
NOTICE: To prevent damage to the docking connector, do not remove or
replace devices while the computer is connected to an APR.
In Microsoft Windows XP
1 Double-click the Unplug or Eject Hardware icon in the Windows
taskbar.
2 Click the device you want to eject.
3 Keep the display open, and tilt the computer back so that you can
access the bottom of the computer.
4 Slide and hold the latch release, and pull the device out of the bay.
5 Insert the new device into the bay, and push it until you hear a click.
6 If necessary, enter your password to unlock your computer.
2H767bk0.book Page 25 Friday, September 28, 2001 1:37 PM