Filter
Top Products
82 Replacing Parts
www.dell.com | support.dell.com
4 Remove all installed batteries, and disconnect the AC adapter cable
and any external devices from the computer. Wait 5 seconds before
proceeding.
5 Ground yourself by touching a metal connector on the back of the
computer.
NOTICE: While you work, periodically touch unpainted metal on the
computer to dissipate static electricity that might harm internal components.
6
Turn the computer over, remove the screw(s) from the memory
module cover, and lift up the cover.
NOTICE: To prevent damage to the memory module connector, do not use
tools to spread the inner metal tabs that secure the memory module.
7
If you are replacing a memory module, remove the existing module.
NOTICE: Handle memory modules by their edges, and do not touch the
components on a module.
a Use your fingertips to carefully spread apart the securing clips on
each end of the memory module connector.
The module should pop up.
b Remove the module from the connector.
memory module cover
screw (2)
2H767bk0.book Page 82 Friday, September 28, 2001 1:37 PM