Filter
Top Products
86 Replacing Parts
www.dell.com | support.dell.com
10 If a Mini PCI card is not already installed, go to step 11. If you are
replacing a Mini PCI card, remove the existing card:
a Disconnect the Mini PCI card from the antenna cables.
b To release the Mini PCI card, spread the metal securing tabs until
the card pops up slightly.
c Lift the Mini PCI card out of its connector.
11 Align the Mini PCI card with the socket at a 45-degree angle, and press
the Mini PCI card into the socket.
12 Connect the antenna cables from the Mini PCI card to the antenna
connectors on the computer.
NOTICE: The connectors are keyed for correct insertion; do not force the
connections.
memory module cover
screws (2)
2H767bk0.book Page 86 Friday, September 28, 2001 1:37 PM