Filter
Top Products
Error Code Message Information
Details This may apply to a physical or remote access attempt.
Action Check system logs for intrusion attempts, and ensure strong
password policies.
SEC0610
Message An Out-of-band password violation detected.
Details This may apply to a remote access attempt.
Action Check system logs for intrusion attempts, and ensure strong
password policies.
SEL0002
Message Logging is disabled.
Details This message is displayed when event logging of a specific
type is disabled by the user.
Action If unintended, re-enable logging.
SEL0006
Message All event logging is disabled.
Details This message is displayed when all event logging has been
disabled by the user.
Action If unintended, re-enable logging.
SEL0008
Message Log is full.
Details When the event log is full, additional events are not written
to the log. Older events may be overwritten and lost. This
message may also appear if the user disabled event logging.
Action Backup and clear log.
SEL0010
Message Log is almost full.
Details When the event log is full, additional events are not written
to the log. Older events may be overwritten and lost.
Action Backup and clear log at the next maintained time.
SEL0012
Message Could not create or initialize the system event log.
Details If the system event log fails to initialize, platform status and
failure events are not captured. Some management software
do not report platform exceptions.
Action Reboot the management controller or iDRAC. Cycle system
input power. If problem persists call support.
116