Filter
Top Products
Figure 9. Removing and Installing a Mezzanine Blank
1. tabs under the mezzanine blank (4) 2. mezzanine blank
3. locking tab on the side of the mezzanine
blank
4. mezzanine card slot
5. mezzanine card retention latch
Installing A Mezzanine Card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Rotate the mezzanine card retention latch to unlock the mezzanine blank.
2. Release the locking tab on the side of the mezzanine blank secured to the wall of the chassis and lift
the mezzanine blank away from the system.
NOTE: Hold the mezzanine card by its edges only.
3. Orient the card to align the connector on the bottom of the mezzanine card with the mezzanine
card slot on the blade system board.
4. Lower the card into place until it is fully seated.
5. Rotate the mezzanine card retention latch over the mezzanine card to secure it in position.
6. Install the blade in the sleeve.
31