Filter
Top Products
4. Position the processor/DIMM blank on the blade system board with the holes on the tabs of the
processor/DIMM blank engaged with the heat sink retention screws on the blade system board.
5. Install the blade system board. For more information, see Installing The Blade System Board.
6. Install the blade in the sleeve.
System memory
Your system supports registered DIMMs (RDIMMs). It supports DDR3 and DDR3L voltage specifications.
NOTE: MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 1600 MT/s or 1333 MT/s depending on:
• DIMM configuration (number of ranks)
• maximum frequency of the DIMMs
• DIMM operating voltage
• system profile selected (for example, Performance Optimized, Custom, or Dense Configuration
Optimized)
• maximum supported DIMM frequency of the processors
The following table shows the memory populations and operating frequencies for the supported
configurations.
Processor DIMM
Type
DIMMs
Populated/
Channel
Operating Frequency (in MT/s) Maximum DIMM
Rank/Channel
1.5 V 1.35 V
Intel Xeon
processor
E5-2400
RDIMM 1 1600 and 1333 1333 Dual rank
RDIMM 1 1333 1333 Quad rank
Intel Xeon
processor
E5-2400v2
UDIMM 1 1600 1600 Single rank
RDIMM 1 1600 and 1333 1600 and 1333 Dual rank
RDIMM 1 1333 1333 Quad rank
The system contains six memory sockets split into two sets of three sockets, one set per processor. Each
three-socket set is organized into three channels.
NOTE: DIMMs in sockets A1 to A3 are assigned to processor 1 and DIMMs in sockets B1 to B3 are
assigned to processor 2.
45