Filter
Top Products
Menu Item Description
NOTE: If you enable this option, access to the vFlash partition is disabled.
Integrated
Network Card 1
Allows you to enable or disable the integrated network card. By default, the
Integrated Network Card 1 option is set to Enabled.
OS Watchdog
Timer
Allows you to enable or disable the OS wacthdog timer. When this field is enabled,
the operating system initializes the timer and the OS watchdog timer helps in
recovering the operating system. By default, the OS Watchdog Timer option is set
to Disabled.
Embedded Video
Controller
Allows you to enable or disable the Embedded Video Controller. By default, the
embedded video controller is Enabled.
SR-IOV Global
Enable
Allows you to enable or disable the BIOS configuration of Single Root I/O
Virtualization (SR-IOV) devices. By default, the SR-IOV Global Enable option is set
to Disabled.
Memory Mapped
I/O above 4GB
Allows you to enable support for PCIe devices that require large amounts of
memory. By default, the option is set to Enabled.
Slot Disablement The Slot Disablement feature controls the configuration of mezzanine cards
installed in the specified slots. Only mezzanine card slots that are present on your
system are available for control.
Serial Communications Screen
Menu Item Description
Serial
Communication
Allows you to enable the COM port or Console Redirection options.
Serial Port Address Allows you to set the port address for serial devices. By default, the Serial Port
Address option is set to COM1.
NOTE: Only Serial Device 2 can be used for Serial Over LAN (SOL). To use
console redirection by SOL, configure the same port address for console
redirection and the serial device.
Failsafe Baud Rate Displays the failsafe baud rate for console redirection. The BIOS attempts to
determine the baud rate automatically. This failsafe baud rate is used only if the
attempt fails and the value must not be changed. By default, the Failsafe Baud Rate
option is set to 11520.
Remote Terminal
Type
Allows you to set the remote console terminal type. By default, the Remote
Terminal Type option is set to VT 100/VT220.
Redirection After
Boot
Allows you to enable or disable to the BIOS console redirection when the
operating system is loaded. By default, the Redirection After Boot option is set to
Enabled.
18