Filter
Top Products
Figure 18. Removing and installing the PERC FD33xD card
1. PERC FD33xD card 2. screw (3)
3. touch point on the cable 4. cable screw (2)
5. touch point on the PERC card (4) 6. connector on midplane interface
module
9. Close the system.
10. Reconnect the system to its electrical outlet and turn on the system, including any attached
peripherals.
Replacing the battery of a PERC FD33xD card
NOTE: The procedure for replacing the battery of a PERC FD33xS card is identical to replacing the
battery of a PERC FD33xD card.
1. Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet and peripherals.
NOTE: It is recommended that you always use a static mat and static strap while working on
components in the interior of the system.
2. Open the system.
3. Locate the PERC card.
4. Remove the PERC card. For more information, see Removing the PERC FD33xD Card.
5. Disconnect the battery cables from the PERC card.
55