Filter
Top Products
DSL-524T ADSL Router Manual
41
PPPoE/PPPoA
Selecting this option in the WAN Settings will change your screen to look like the one seen below.
PPP or Point-to-Point protocol is a standard method of establishing a network connection/session
between networked devices. Different forms of PPP include PPPoA and PPPoE, and they involve an
authentication process that requires a username and password to gain access to the network. PPPoE
(PPP over Ethernet), as described in RFC 2516, is a method of using PPP through the Ethernet
network. PPPoA (PPP over ATM) configuration is over ATM and requires the same basic information
as the previously discussed PPPoE. Both configuration menus are identical.
To configure the connection for PPPoE/PPPoA, perform the steps listed below. Some of the settings
do not need to be changed the first time the device is set up, but can be changed later if you choose.
Figure 4- 4. WAN Settings window for PPoE/PPoA
Username &
Password
Type the Username and Password used to verify the identity of your
account. Typically, the Username is an account number assigned by
your ISP. See your ISP for further information.