Filter
Top Products
DSL-524T ADSL Router Manual
69
To configure RIP, first use the RIP pull-down menu to enable RIP on the Router. Then select the
protocol to be used by using the pull-down menu. The choices are RIP v1, RIPv1 Compatible and
RIP v2. Then the user must choose the direction by selecting In, Out or Both. After making the
configuration choices for RIP, click the Apply button to set the configurations in the memory of the
Router.
PPP
The following window is for users employing the PPP protocol as their connection to the ISP. This
window will be specific to PVCs previously configured and will display information concerning the
PVC selected in the WAN configuration window.