Filter
Top Products
DSL-524T ADSL Router Manual
63
The user may configure the following fields for Static routing on the router:
Destination
Enter the host IP address or the remote network that will be used for static routing on
the router.
Netmask
Enter the Subnet Mask to be used for static routing.
Gateway
Enter the gateway device’s IP address. This is an IP address of a device that will
allow the user to contact the remote network or Host IP address. This field cannot be
configured or used if the following field, Connection, has been selected.
Connection
Choose a PVC from the corresponding pull-down menu to be used for static routing.
This field cannot be configured or used if the previous field, Gateway, has been
selected.
Click Apply to set the routing information configured.