D-Link DES-5200 Switch User Manual


 
Fast Ethernet Switching System User’s Guide
Introduction
3
The DES-5200 can be managed through four methods: Console
Management, Telnet Management, SNMP Management and Web
Management.
Supports Cut-through and Store-and-Forward switching.
Supports Full and Half Duplex for both 10 Mbps and 100 Mbps.
Supports Spanning Tree Protocol to eliminate network loops.
Eight thousand active MAC address table entries per device with
self-learning and table aging.
The DES-5200 supports SNMP for RFC 1213, RFC 1757, and
RFC 1493.
VLAN support for eight broadcast domains.
Port Trunking support for bandwidth aggregation between two
DES-5200 switches.
The 1000BASE-SX port supports flow control compliant with
IEEE 802.3x standard.
Modular chassis that support RJ-45, fiber optic and gigabit
expansion modules
Support for RMON statistics through SNMP software.