Filter
Top Products
Fast Ethernet Switching System User’s Guide
Managing the DES-5200
73
Status
The DES-5200 will not send out traps unless the status is Valid.
Follow these steps to enter the SNMP Community String:
1. Enter the name of the SNMP Community.
2. Select the Access Right field and toggle the space bar to select
Read Only or Read/Write.
3. Select the Status field and toggle the space bar to select Valid or
Invalid.
4. Select Save and press Enter.
Follow these steps to configure the SNMP Trap Manager Setting:
1. Enter the IP Address of the Trap Manager.
2. Enter the name of the SNMP Community String.
3. Select Status and toggle the space bar to select Valid or Invalid.
4. Select Save and press Enter.