D-Link DES-5200 Switch User Manual


 
Fast Ethernet Switching System User’s Guide
Introduction
4
Front Panel
The DES-5200 is designed for management at a glance. The front of the DES-
5200 has LEDs that give you essential information at a glance.
The DES-5200 is a modular unit. The chassis has a CPU slot and four slots for
media modules. All the modules have LEDs. See Chapter 4, LEDs, for
information on interpreting the LEDs. All models come with the CPU module in
the top slot. The slots are in the following order: CPU module is in the top slot, as
shown in figures. Slots one and two are full sized. Slots three and four are half-
sized. All slots support modules and can be used simultaneously.
All ports can be used for network connections. The RS-232 port is used for
Console Management.
All LEDs are located on the front panel of the DES-5200. Their purpose is to
enable you to monitor the operation and performance of the DES-5200.
Refer to Table 1: DES-5200 Series Model List, Table 2: DES-5200 Full Size
Modules and Table 3: DES-5200 Optional Modules for information about part
numbers and ordering modules. Contact D-Link, Inc. sales to purchase modules.
Models
There are three models available:
The DES-5224TX has two 12-Port 10/100-TX modules.
The DES-5220TF has one 12-Port 10/100-TX module and one 8-
Port 100BASE-FX module.
The DES-5216FX has two 8-Port 100BASE-FX modules.
Table 1: DES-5200 Series Model List
Model Name Part Number Description
DES-5224TX DES5224TX.A1 Two 12-Port 10/100-TX modules
DES-5220TF DES5220TF.A1 One 12-Port 10/100-TX module and
one 8-Port 100BASE-FX module
DES-5216FX DES5216FX.A1 Two 8-Port 100BASE-FX modules