Filter
Top Products
Figure 3-3 Generator Front View (typical) Low Prole
Unpacking
Carefully open your shipping container, and make sure
it contains the items shown on the shipping documents.
Inspect all items, and report any damage immediately.
Placement
Generator placement and cable routing should permit
easy access and not interfere with normal system opera-
tion.
Allow at least 5 inches (13 cm) of space on both ends of
the generator chassis for air circulation. Allow space -
between 3-6 inches, [8-15 cm] - at the rear of the chassis
for cable clearance. (The amount of space depends on the
chassis type and what rear panel connections there are.)
See Section 10 - Specications, for generator drawings.
CAUTION
Allow 5 inches for air ventila-
tion at the cooling air inlet and
at the exhaust air outlet. The
fan draws in fresh air to cool
the internal components, reduce thermal
gradients and increase component life.
OPTIONAL
POWER BUTTON
IN
[mm]
3.81
[96.8]
3.45
[87.63]
17.16
[435.86]
COOLING AIR
INLET
EXHAUST AIR
OUTLET
i
Q
Continued
Page 15
Dukane Manual Part No. 403-575-00
Section 3 - Installation