Filter
Top Products
Quick Start -
Pneumatic Step 1 - Read Section 4
of the iQ Explorer User's Manual 403-579-00. It is im-
portant that you understand and familiarize yourself with
the operation and navigation of the iQ Explorer user
interface software.
Insure that proper connection of the iQ Explorer soft-
ware with the pneumatic press is in place. See Figure
4-24 and Section 3 of the iQ Explorer User's Manual.
Servo Welder Quick
Start
See Pages 44- 55
Pneumatic Welder
Lab
Page 56
iQ Series Ultrasonic Generator/Power Supply ES User’s Manual
Dukane Manual Part No. 403-575-00
]
Icon indicates
connection has
been made.
Name of the connected welder.
Figure 4-24 iQ Explorer, Start-up
Dukane iQ Explorer - [Welder 1]
Figure 4-25 iQ Explorer Start-up, Hardware Tab
Pneumatic Step 2 - Hardware Tab
After moving to the Hardware tab, click on the Setup
File Name box, and select an unused setup. This will
ensure that you do not overwrite a pre-existing setup.
See Figure 4-25 below.
Dukane iQ Explorer - [Welder 1 - Setup 4]