Filter
Top Products
Quick Start - Servo Welder
Servo Step 1 - Read Section 3,
Installation of the iQ Explorer User's Manual
403-579-00. Insure that proper connection of the iQ
Explorer software and the servo press are in place.
See Figure 4-5 below.
It is important that you understand and familiarize your-
self with the operation and navigation of the iQ Explorer
user interface software. Be familiar with iQ Explorer
User's Manual - Section 4, Operation.
Icon indicates
connection has
been made.
Name of the connected welder.
Figure 4-5 iQ Explorer, Start-up
Figure 4-6 iQ Explorer, Start-up, Hardware Tab
Servo Step 2 - Hardware Tab
After moving to the Hardware tab, click on the Setup
File Name box, and select an unused setup. This will
ensure that you do not overwrite a pre-existing setup.
See Figure 4-6 below.
Hardware Tab
Pneumatic Welder
Quick Start
See Pages 56-69
Dukane iQ Explorer - [Welder 1- Setup 4]
Dukane iQ Explorer - [Welder 1]
Page 44
iQ Series Ultrasonic Generator/Power Supply ES User’s Manual
Dukane Manual Part No. 403-575-00