Filter
Top Products
Pneumatic Step 11 - Process Settings >Amplitude
Figure 4-36 iQ Explorer, Process Settings > Amplitude
Amplitude - This refers to the peak-to-peak displacement
of the horn at its workface. Amplitude settings are given
as a percent of the horn's nominal amplitude in the range
of 20% to 100%.
Select Local.
Then, at Weld, select 100%.
For a basic setup, leave Ramp Up Time and Ramp Down
Time at 0.150 and 0.000 respectively (the default settings).
See Figure 4-36 below.
NOTE
Default settings for Ramp Up Time and
Ramp Down Time are dependent on the
frequency of the welding system.
Page 65
Dukane Manual Part No. 403-575-00
Section 4 - Operation
0.150
0.000
100
Local