Filter
Top Products
Installing the Drivers
Use the instructions in your AutoCAD documentation to
install the program on your hard disk. To install the drivers,
follow the steps below:
1.
Copy the AutoCAD 2.62 driver files from your Utility 2
diskette to the directory on your hard disk containing the
AutoCAD program. Log onto your AutoCAD directory. To
copy the files, insert the Utility 2 diskette in drive A; then
type the following and press Enter:
COPY A:\ACAD2\*.*
2.
Before running AutoCAD, you must load the display driver
into the computer’s memory. First, log onto your AutoCAD
directory. Then type the display driver program name at the
MS-DOS command prompt and press Enter. This starts the
driver program.
For example, to load the 800 x 600, 16-color graphics driver
into memory, type the following and press Enter:
DS2V600
You can install the driver automatically each time you turn on
or reset your computer by placing the command in your
AUTOEXEC.BAT file. To modify the AUTOEXEC.BAT file
to load the 800 x 600, 16-color graphics driver, follow these
steps:
1.
Type C : \ and press Enter to log onto the root directory
of your hard disk.
2.
Type the following and press Enter:
COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT
A-10
Using the VGA Utilities