Filter
Top Products
3. Create a temporary directory called VENTEMP on your
hard disk. At the MS-DOS prompt, type the following and
press
Enter:
MD VENTEMP
4.
To copy all the files from the VEN1 directory on your
Utility 1 diskette into the VENTEMP directory on your
hard disk, type the following and press Enter:
COPY A:\VEN1\*.* C:\VENTEMP\*.*
5.
Remove the Utility 1 diskette.
6.
Use the Epson MENU utility or the MS-DOS FORMAT
command to format a blank diskette. (See your MS-DOS
Reference Manual for instructions.)
7.
Insert the blank, formatted diskette and log onto the
VENTEMP directory. Then type the following and press
Enter:
COPY *.* A:
8.
Log onto drive A.
9.
If you are using Ventura Publisher, version 1.0, type the
following and press
Enter:
VPDRIVER
If you are using Ventura Publisher, version 1.1, type the
following and press
Enter:
VPDRVl 1
-
10. Select either VGA (640 x 480) or VGA (800 x 600) and
continue the installation procedure according to the
instructions on the screen.
A-24 Using the VGA Utilities