Filter
Top Products
Installing the Drivers
Follow the steps below to install the Epson drivers:
1.
Install Lotus 1-2-3 or Symphony on your hard disk
using the
instructions in the program manual.
2.
Copy all the drivers from the LOTUS directory on the
Utility 1 diskette to the directory on your hard disk
containing 1-2-3 or Symphony.
For example, to copy the drivers after you have installed
Lotus 1-2-3, insert the Utility 1 diskette, type the following,
and press
Enter:
COPY A:\LOTUS\*.* C:\123\
3.
Log onto the directory containing your Lotus program. (For
1-2-3, type CD \ 123 and press Enter.)
4.
To start the installation program, type the following and
press
Enter:
INSTALL
5.
When the Lotus installation program is loaded, you see the
Installation menu. Select Advanced options from
this menu.
6. Then select Add new drivers to library.
7. Next choose Modify current driver set.
8. Select Text display.
Using the VGA Utilities
A-29