Filter
Top Products
Ventura Publisher, Version 2.0
Epson includes a driver for Ventura Publisher 2.0 to provide an
800 x 600, 2-color graphics resolution.
Installing the Drivers
Follow the instructions below to install the display driver. If you
have already installed Ventura Publisher 2.0, go to step 2 to
install the Ventura driver. If you have not yet installed Ventura
Publisher 2.0, begin with step 1.
1.
2.
3.
4.
5.
6.
Use the documentation for Ventura Publisher to install the
program.
After you complete the Ventura Publisher installation,
insert the Utility 1 diskette in drive A.
Create a temporary directory called VENTEMP on your
hard disk. At the MS-DOS prompt, type the following and
press
Enter:
MD VENTEMP
To copy all the files from the VEN2 directory on your
Utility 1 diskette to the VENTEMP directory on your hard
disk, type the following and press Enter:
COPY A:\VEN2\*.* C:\VENTEMP\*.*
Remove the Utility 1 diskette.
Use the Epson MENU utility or the MS-DOS FORMAT
command to format a blank diskette. (See your MS-DOS
Reference Manual for instructions.)
Using the VGA Utilities
A-25