Filter
Top Products
10. Tilt up the front panel until the clips on the top of the
panel touch the computer. Then push on the top of the
panel until it clicks into place. The diskette drive(s) should
be flush with the front of the panel.
(If you removed the slot cover, be sure to store it in a safe
place in case you need to replace it later.)
11. Follow the steps under “Replacing the Cover,” in Chapter
5, to replace the cover on the computer. Then see “Post-
installation Setup,” later in Chapter 5, for instructions on
configuring your computer for use with your new disk drive.
Installing and Removing Disk Drives
B-57