Filter
Top Products
2.
Press
Enter
to move the cursor block into the submenu.
You see:
3. If you want to change the serial port setting, be sure
Serial
is
highlighted and press
Enter.
If you want
to
change the parallel port setting, highlight
Parallel
and press Enter. The cursor block moves into the submenu.
4.
Use
L
or
T
to highlight the appropriate setting for the port
you selected and press Enter. The screen displays the new
setting.
Note
If you add an option card with a parallel or serial port and
highlight a setting that causes a conflict between your
built-in ports and the port on the option card, you see
this message:
Conflict with option card
Highlight a setting that is appropriate for your system’
configuration and press
Enter.
If you want to change the setting for the other port, return
to step 3.
5.
When the serial and parallel port settings are correct,
highlight *** SAVE SETTINGS *** and press
Enter. The cursor block returns to the main Setup menu
and you see your updated serial and parallel interface
settings.
Running the Setup Program
2-29