Filter
Top Products
Write down the error message and code number, and then press
F1 to continue. Report the error message and code number to
your dealer when requesting repairs.
If the error is serious, the computer cancels further checking
and halts system initialization. The error message remains on
the screen, and the computer locks up. If this happens, contact
your dealer as soon as possible. Report this information and
both the error message and code number to your dealer.
If you see a power-on diagnostics error message, look up the
message in the table below. The table directs you to the proper
troubleshooting section in this appendix. If you do not see an
error message, read the section that covers the problem you are
having.
The following table lists all the error codes and messages that
may appear during power-on diagnostics checks.
Power-cm diagnostics error codes and messages
Error code
Message
Action
System board
101
SYSTEM BOARD ERROR
Contact dealer
102
SYSTEM BOARD ERROR
103
SYSTEM BOARD ERROR
105
SYSTEM BOARD ERROR
106
SYSTEM BOARD ERROR
107
SYSTEM BOARD ERROR
108
SYSTEM BOARD ERROR
150 SYSTEM BOARD ERROR
Real-time clock
161
SYSTEM OPTIONS NOT SET
Contact dealer
162
SYSTEM OPTIONS NOT SET
Run Setup; see
Chapter 2
163
TIME AND DATE NOT SET
Run Setup: see
Chapter 2
164
MEMORY SIZE ERROR
Run Setup; see
Chapter 2
Troubleshooting D-3