Filter
Top Products
1.
At the main Setup menu, highlight
Display. You see
the current display adapter type, such as the following:
I
VGA
I
If the display adapter type is correct for your system, you can
skip this section.
2.
To change the display adapter setting, press Enter. The
cursor block moves into the submenu and you see:
CGA 40 column
CGA 80 column
Monochrome 80 column
EGA,MCGA,VGA or other
3.
Press Enter to move the cursor block into this submenu and
then use
t
or
L
to highlight the option that matches your
display adapter type. If you are not sure which one to
choose, follow these guidelines:
Ll
If you are using the built-in VGA adapter or have
installed a VGA, EGA, or MCGA card, select EGA,
MCGA, VGA or other.
tl
If you have a color graphics adapter (CGA) or a multi-
mode graphics adapter (MGA) attached to an RGB
(color) monitor, select CGA 80 column. (Also set
the color/mono switch on the MGA card to color.)
Running the Setup Program
2-7