Filter
Top Products
Removing a Disk Drive From the Horizontal Position
The figures in this section show a diskette drive in the lower
horizontal drive bay, but you can use the same instructions to
remove a hard disk drive from the lower bay or to remove your
standard diskette drive from the upper bay.
Follow these steps to remove a disk drive from a horizontal drive
bay:
1.
Remove the disk drive ribbon cable from the back of the
drive, as shown below.
ribbon cable connector
1
2.
Remove the power supply connector from the back of the
drive. It is connected near the ribbon cable interface, as
shown in the next illustration.
B-44
Installing and Removing Disk Drives