Filter
Top Products
6. Put back covers [A] and [B].
7. Plug in the machine, then turn on the power.
Caution
Do not plug in or switch on until everything is connected up.
Optional Font and Emulation Mode Cards
See Appendix D for details on the types of font and emulation mode cards available,
how to use them, and how to look after them.
To install a card, do the following:
1. Make sure that the machine is in printer "Ready" mode and that it is off line (the
indicator must be off).
❐ The indicator must be off. If it is flashing, the printer is receiving data. If it is lit
but not flashing, press to print the data that is still in the buffer.
❐ Never insert a card if the printer is on line, or while you are making printer set -
tings (using Selectype mode), or while the printer is resetting.
2. Hold the card so that the maker’s logo is pointing up and the arrow is pointing to -
wards the slot.
❐ Make sure that the card is the correct
way up.
❐ The card is slightly bent. Do not try to
flatten it or bend it further.
❐ Do not touch the small gold contacts
along the card’s edge.
3. Carefully slide the card in to the slot.
❐ Do not force it into the slot.
If REMOVE CARD appears on the
display, you inserted the card when the
printer was on line or when the printer
memory contained some data. Remove
the card and press . Then go back to
step 1 of the installation procedure.
INSTALLATION
11