Filter
Top Products
5.
6. Press or until the required font number
is displayed. Example: Font number 1.
Note: Font types are displayed only as numbers in this procedure. To see the font
types that correspond to each font number, print a font sample sheet (use the
FONT SAMPLE procedure on page 9).
7. Store the displayed setting:
If you have just selected a scalable font, you must
perform an additional step.
For proportional fonts: The display is as
shown on the right.
❐ Press or to select the point size that
you need, then press .
Available settings: 4.00 to 999.75 in steps
of 0.25
For fixed pitch fonts: The display is as
shown on the right.
❐ Press or to select the spacing in char -
acters per inch, then press .
Available settings: 0.44 to 99.99 in steps of
0.01
8. until the machine returns to printer
"Ready" mode.
You can only select fonts that match the current orientation setting. If you change the
SYMSET or ORIENT settings, the available font numbers may change.
To save the selected font as the default font, use the SAVE MACRO routine (see page
31).
APPENDIX B. HP EMULATION MODE
B-6