Filter
Top Products
2. Press or until COPIES is displayed.
3. To change the current setting:
4. Press or until the required setting is dis -
played.
5. Store the displayed setting:
6. twice to return to printer "Ready" mode.
ORIENT.
This allows you to select either landscape or portrait mode. The settings available dif -
fers depending on the emulation mode. See Appendixes B and C for details.
FONT
This allows you to select a font for printing. The fonts available are different for each
emulation mode. See Appendixes B and C for details.
STATUS SHEET
This feature lets you print a sheet of the current settings.
The procedure is given on page 9. Also, see the sample in Appendix G.
Note: If you wish to print a status sheet for each of your macros, do the following for
each of your macros.
❐ Load the macro (see page 32 for the LOAD MACRO feature).
❐ Print the status sheet using the STATUS SHEET procedure.
FONT SAMPLE
This feature allows you to print all the fonts that are available for the current emulation
mode.
The procedure is given on page 9.
SUB CONFIG.
This is a menu of features within Level 1. This menu allows you to fine-tune the way
that the current emulation mode works. The settings available in the SUB CONFIG.
menu differ with each emulation mode; see Appendixes B and C for details.
ADJUSTING THE PRINTER SETTINGS
28