Filter
Top Products
SET FULL PRINT
This message may appear when you are trying to print a page that contains graphics.
Pressing may clear the problem and allow you to continue printing. However, if the
message appears often, you should increase the FULL PRINT setting (see page 29).
STARTUP ERROR
If this message appears when you turn on the printer, the power may have been
switched off while the printer was performing a save operation. To clear the error,
press to return the printer to its factory default settings. WAIT appears while the re -
set is in progress.
TONER LOW
The toner has almost run out. When this message first appears, you can only print 25
more pages from the computer before you have to replace the toner cartridge. How -
ever, the machine can print up to 100 more pages of incoming fax messages.
TONER OUT
The toner cartridge must be replaced. See your fax machine’s Operator’s Manual for in -
formation on how to add fresh toner.
TRAY SET {paper source} {paper size}
The PAGE SIZE setting (see page 27) does not match the paper in the specified pap er
source. Either change the PAGE SIZE setting, or load the correct paper size. Press
to print the page when you have corrected the problem.
WAIT
The printer is being reset after a startup error. Please wait.
SOLVING PROBLEMS
47