Filter
Top Products
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Disassembly and Assembly Disassembly and Assembly of Printer Unit 52
4.5.2 Carriage Unit
1. Middle Housing Removal. (p43)
2. CR Scale Removal. (p.51)
3. Remove two screws on the left side of the FFC holder, and remove it from the
main frame.
4. Remove six screws on the guide plate, and remove it from the printer unit.
5. Remove one screw on the holder stopper, and remove it from the printer unit.
6. Remove a extention spring of the driven pulley holder.
Figure 4-10. Carriage Unit Removal-1
C.B.S Tite 3x6,F/ZN
Tightening torque
:0.5 ± 0.1 N
⋅m
C.B.S Tite (P4),3x6,F/ZN
Tightening torque:0.8 ± 0.1 N
⋅m
Holder Stopper
Extention Spring
C.B.S Tite 3x6,F/ZN
Tightening torque:0.8 ± 0.1 N
⋅m
C.B.S Tite 3x6,F/ZN
Tightening torque
:0.5 ± 0.1 N
⋅m
Guide Plate
C.B.S Tite 3x6,F/ZN
Tightening torque:0.5 ± 0.1 N
⋅m
Ffc Holder
C.B.S Tite R 3x4,F/ZN
Tightening torque
:0.8 ± 0.1 N
⋅m