Filter
Top Products
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Adjustment Adjustments by Adjustment Program 75
5.2.3.3 Refurbishment For DOA
If you clean the cavity of the printhead and cap assembly, this function will be useful.
5.2.3.4 Waste ink pad counter
This counter controls total ink eject volume and displays error status if the volume
exceeds the set value, displaying the waste ink overflow indication (printer error
indication and Error LED blinking.). By selecting this item, you can check or clear the
waste ink pad counter.
This operation is necessary after the following work.
Waste Ink Porous Pad replacement
Maximum count : 20000~46750 (depending on printing conditions)
Functions of buttons
[Read] : You can check the current count.
[Reset] : Clear the waste ink pad counter value.
(Return the value to zero)
Figure 5-15. Refurbishment For DOA Screen
Figure 5-16. Waste Ink Pad Counter Screen
C A U T I O N
After carry out this function, replace the waste drain ink pad
with new one and reset the Waste drain ink pad counter.
Otherwise, the ink or CR02 liquid may leak from the pad
during the transportation.
Prepare the following tool.
• Dummy ink cartridge, Injector, CR02 liquid
Do not carry out this program repeatedly. This operation is
available only one time. Excessive operation causes overflow of
the ink and CR02 liquid.
When you refurbish the repair product by using this program,
do it on your responsibility.
When you charge CR02 liquid into the dummy ink cartridge
with the Injector, make sure fill out the dummy ink cartridge
with CR02 liquid. In case enough CR02 liquid is not charged
into the dummy cartridge, the printhead will not cleaned and
not filled with the CR02 liquid enough in this operation.
Keep the CR02 liquid and the dummy ink cartridge clean.