Filter
Top Products
11-4
EPSON Status Monitor 2 (Windows only)
R4C3610 Adm/G
Rev. C
A5 size CHAP11.FM
8/4/00 Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Local Printer
Connect the printer directly to the printer port of your computer.
For Windows 98/95:
You need to set the bidirectional support in the printer’s
properties dialog box. Click the
Details
tab and click
Spool
Settings
. Click the
Enable bidirectional support for this printer
radio button.
Note:
When you monitor a local printer with Windows 98/95, use LPT1 for
the printer port.
LPR printer
LPR printers use LPR over TCP/IP as their communication
protocol suite, and you must install both protocols to use the
Status Monitor to monitor a LPR printer. To connect to a printer
on the network and share the printer without using the server:
For Windows 98/95:
You need to set the printer using EpsonNet Direct Print. See
“Setting Up Your Printer” on page 10-3.
For Windows 2000/NT 4.0/NT3.51:
You need to set for TCP/IP printing. See “Installing TCP/IP
Protocols in Your PC” on page 2-2.
The EPSON Status Monitor 2 can also monitor lpr printers added
by EpsonNet Direct Print.
Windows 98/95 Windows 2000/
Windows NT 4.0
Windows NT 3.51
Bidirectional support
is necessary.
No special settings. Not able to monitor.